Kia Cerato 2021 Manual Download Page 405

Page: 405 / 714

Driving your vehicle

Forward Collision-Avoidance Assist (FCA)

(Sensor fusion)

WARNING

䳜 When you are towing a trailer or

another vehicle, we recommend
that Forward Collision-Avoidance
Assist is turned off due to safety
reasons.

䳜 Forward Collision-Avoidance

Assist may operate if objects that
are similar in shape or character

istics to vehicles and pedestrians
are detected.

䳜 Forward Collision-Avoidance

Assist does not operate on bicy

cles, motorcycles, or smaller
wheeled objects, such as luggage
bags, shopping carts, or strollers
that are dragged by a pedestrian.

䳜 Forward Collision-Avoidance

Assist may not operate normally
if interfered by strong electro

magnetic waves.

䳜 Forward Collision-Avoidance

Assist may not operate for
approximately 15 seconds after
the vehicle is started, or the front
view camera is initialized.

Forward Collision-Avoidance
Assist (FCA) (Sensor fusion) (if
equipped)

Basic function

Forward Collision-Avoidance Assist
is designed to help detect and moni

tor the vehicle ahead or help detect
a pedestrian or cyclist in the road

way and warn the driver that a colli

sion is imminent with a warning
message and an audible warning,
and if necessary, apply emergency
braking.

NOTICE

FCA stands for Forward Collision-
Avoidance Assist.

OBD051362

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands

Kia Cerato 2021, Manual

Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands