manualshive.com logo in svg

Kia 2011 optima, Owner'S Manual

Looking for the Owner's Manual for your Kia 2011 Optima? Look no further! Download the comprehensive manual for free from our website. Get all the essential information and instructions you need to optimize your driving experience with the Kia 2011 Optima. Don't miss out, download it now from manualshive.com.

Share
Download
background image

4 107

Features of your vehicle

✽

✽

NOTICE

Prolonged operation of the heating in
recirculated air position will cause fog-
ging of the windshield and side windows
and the air within the passenger com-
partment will become stale.
In addition, prolonged operation of the
air conditioning with the recirculated
air position selected, will result in exces-
sively dry air in the passenger compart-
ment.  

Fan speed control

The fan speed can be set to the desired
speed by pressing the fan speed control
switch.
To change the fan speed press the 
part of the switch for higher speed or
press the

part of the switch for lower

speed.
To turn the fan speed control off, press
the OFF button.

Air conditioning

Press the A/C button to turn the air con-
ditioning system on (indicator light will
illuminate).
Press the button again to turn the air
conditioning system off.

WARNING

• Continuous use of the climate con-

trol system in the recirculated air
position may allow humidity to
increase inside vehicle which may
fog the glass and obscure visibility.

• Do not sleep in a vehicle with air

conditioning or heating system on.
It may cause serious harm or death
due to a drop in the oxygen level
and/or body temperature.

• Continuous use of the climate con-

trol system in the reciruclated air
position can cause drowsiness or
sleepiness, and loss of vehicle
control. Set the air intake control to
the outside (fresh) air position as
much as possible while driving.

OTF040140N

OTF040139N

Summary of Contents for 2011 optima


































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2011 optima

Baja Designs S8 Instructions Manual preview
S8
Brand: Baja Designs Pages: 6
Kargo Master 40131 Installation Manual preview
40131
Brand: Kargo Master Pages: 5
Westin 23-3130 Instructions preview
23-3130
Brand: Westin Pages: 3
OCTO SmartDiag2GO GD201-O User Manual preview
SmartDiag2GO GD201-O
Brand: OCTO Pages: 5
Whispbar K783W Fitting Instructions Manual preview
K783W
Brand: Whispbar Pages: 16
Cargo Floor CF500 SL-2 Replacement Instructions Manual preview
CF500 SL-2
Brand: Cargo Floor Pages: 16
Spiral Audio KT-FI001PB Nstallation Instructions preview
KT-FI001PB
Brand: Spiral Audio Pages: 2
StowAway 2 025.41 Assembly Instructions preview
025.41
Brand: StowAway 2 Pages: 2
ZAPTEC ZapCharger Portable C1 User Manual preview
ZapCharger Portable C1
Brand: ZAPTEC Pages: 20
JBL smartbase Quick Start Manual preview
smartbase
Brand: JBL Pages: 12
Kia Picanto Manual preview
Picanto
Brand: Kia Pages: 680
Waeco Magic Watch MWE-850-4DSM Installation And Operating Manual preview
Magic Watch MWE-850-4DSM
Brand: Waeco Pages: 204
Mercedes-Benz CLS 2015 Operator'S Manual preview
CLS 2015
Brand: Mercedes-Benz Pages: 398
Horn Tools HJIMRR02FIT Mounting Instructions preview
HJIMRR02FIT
Brand: Horn Tools Pages: 12
Huf HUF8432MS Technical Description And User Manual preview
HUF8432MS
Brand: Huf Pages: 6
Green Valley 601951 Instructions Manual preview
601951
Brand: Green Valley Pages: 17
Edelbrock Honda XR400 Instruction Supplement preview
Honda XR400
Brand: Edelbrock Pages: 2
Hudson Super Six 1916 Reference Book preview
Super Six 1916
Brand: Hudson Pages: 77

Brands by name

Popular brands

Load more brands