2
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Universal Height-Adjustable Screens
Assembly Instructions
3. Insert a square holed sleeve onto
the adjustable mechanism rod, then
place the longer connecting rod
onto the square holed sleeve just
installed (Detail B). Finally, insert a
second square holed sleeve onto the
opposite end of the connecting rod
(Figure 2).
4. Locate another adjustable
mechanism and press the mounting
bracket up to the underside of the
worksurface, then slide it over and
insert the adjustable mechanism rod
into the square holed sleeve/long
connecting rod installed in step 4,
synchronizing the two mechanisms
together. Secure the mounting
bracket of the second mechanism to
the underside of the tabletop using
four #12 x 1” screws (Figure 3).
5. Screens installed to tables 60”
or greater have three adjustable
mechanisms per assembly. If
assembly contains a third
mechanism repeat steps 3 through 4.
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Figure 3
adjustable
mechanism
mounting
bracket
square
holed sleeve
#12 x 1”
PPH screws
Detail C
adjustable
mechanism
rod
square holed
sleeve
Figure 2
adjustable
mechanism
connecting
rod
square
holed sleeve
square
holed sleeve
connecting
rod
square
holed
sleeve
adjustable
mechanism
rod
Detail B
square
holed sleeve
