Uniframe
®
Convertible Bench
Operating Instructions
Ganging Tables
1. To gang tables together, first
make certain that the tabletops are
locked into the upright position
and move tables together, with
benches to the outside. Align the
feet of the table bases and locate
the sliding foot ganger on the foot
(Figures 4 & 5).
Note:
There will be
approximately a
1
/
2
" gap
between tabletops when
ganged to avoid finger pinching.
Caution:
Keep hands from
between tops and legs when
moving tables together.
2. Lift up and slide the ganger from
the stored position of one table
foot, engaging onto the foot of the
second unit, interlocking the hole
in the ganger over the acorn nut
on the second table leg. Repeat
procedure at other end of the
table (Figure 6).
1330 Bellevue Street • P.O. Box 8100 • Green Bay, WI 54308-8100 • Tel 1-800-424-2432 • www.ki.com
© 2018 Krueger International, Inc. All Rights Reserved • Code KI-61587R5/KI/PDF/0918
Figure 4 - Ganging of Tables
tabletops
bench
sliding foot
ganger
bench
Figure 5 - Ganger Stored Position
support
leg
acorn
nut
support
leg
support
leg
acorn
nut
sliding
foot
ganger
sliding
foot
ganger
Figure 6 - Ganger Engaged Position
sliding foot
ganger
sliding
foot
ganger
Storage Position
1. When tables are to be separated,
lift up and slide the ganger back
to the stored position at both
ends of table pair, then move
tables apart (Figure 5).
