Operating Instructions
Uniframe
®
Convertible Bench
September 2018
Tabletop Operation
To Flip Down for Bench
1. Lift up and pull at the center of the
table top closest to the bench to
unlock, then rotate the tabletop down
until table apron rests against vertical
leg support and the worksurface
becomes the backrest. (Figures 1 &
2, Details A & B).
To Flip Up for Table
1. Lift up on front edge of table apron at
the center and rotate up until top is
horizontal and drops into the locked
position (Detail A).
Bench Storage/Transport Position
1. To store or transport unit, lift up
on bench, rotating the bench to the
vertical position (Figure 3 &
Detail C).
Locking Casters
1. Lock casters to use bench/table.
Unlock casters to transport table
(Figure 1).
Figure 1 - Single Table Position
locking caster
tabletop
Detail A - Table-to-Bench Position
tabletop
apron
support
leg
Figure 2 - Bench Position
tabletop
Detail B - Bench Position
tabletop
apron
Figure 3 - Storage/Transport Position
bench
Detail C - Bench-to-Storage Position
bench
