Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
1330 Bellevue Street • P.O. Box 8100 • Green Bay, WI 54308-8100 • Tel 1-800-424-2432 • www.ki.com
© 2019 Krueger International, Inc. All Rights Reserved • Code KI-000053/KI/PDF/0819
Soltice
®
Metal - Connecting Tables
Assembly Instructions
Figure 3
connecting
end table
leg
plate
90 degree
connector
table
leg
plate
#10 x / ”
Phillips wood
screws
3
4
support
leg
support
leg
#10 x / ”
Phillips wood
screws
3
4
Connecting End Table and
90 Degree Connector Table
Assembly
1. Carefully place connecting end
table or 90 degree connector
table upside down on a soft,
protective surface. Align the
mounting holes of the support
leg mounting plate with the
pre-drilled leg holes in the
underside of the table. Secure the
leg plate to the table using four
#10 x
3
/
4
” wood screws provided
(Figure 3).
2. To connect the
90 degree
connector table
, place the table
(with support leg attached) onto
the pre-installed connecting table
brackets of the seats it will join
to. Align the pre-drilled holes of
the underside of the table with
the mounting holes of the table
brackets and secure using six
#10 x
3
/
4
” wood screws
(Figures 4 & 5).
3. To connect the
connecting
end table
, place the table (with
support leg attached) onto the
pre-installed connecting table
bracket of the seat it will join to.
Align the pre-drilled holes of
the underside of the table with
the mounting holes of the table
bracket and secure using six
#10 x
3
/
4
” wood screws
(Figure 4).
Figure 4
connecting
end table
90 degree
connector
table (inside)
connecting
table bracket
#10 x / ”
Phillips wood
screws
3
4
#10 x / ”
Phillips wood
screw
3
4
Figure 5
90 degree
connector
table (outside)
table
bracket
#10 x / ”
Phillips wood
screws
3
4
