Required
Tools
Disassembly Instructions
Material Type:
Warning: This drawing format requires special non-standard fonts!!
Make sure the appropriate font files are installed!!!
TT Humanst 521 BT Light
O HelveticaLTStd-Cond
O HelveticaLTStd-LightCond
InTandem Table
Page 2 of 2
Rev. 0
P0033-0056
A .Steel
B. Aluminum
C. Plastic
D. Electrical Component
KI · 1330 Bellevue Street · P.O. Box 8100 · Green Bay, WI 54308-8100 · 1-800-424-2432 · www.ki.com
Procedure (continued):
6. Remove the screws holding the electrical harness and cover
plates to the beam and remove the harness and plates.
7. Pull out the trim channel on the back of each leg and remove
the channel retaining clip.
8. Remove the glides from the bottom of each leg.
9. Remove the glides and pry out the glide housings inserted
into each leg tube.
Gloves
Safety Glasses
Philips Screwdriver
Channel Lock Pliers
Torx Screwdriver
A
B
C
C
A
A
A
A
C
C
D
