Assemble units as described herein only. To do otherwise may
result in instability. All screws, nuts and bolts must be tight-
ened securely and must be checked periodically after assem-
bly. Failure to assemble properly, or to secure parts may result
in assembly failure and injury.
I n q u i r e
®
Ta b l e s
A s s e m b l y I n s t r u c t i o n s
2
Figure 3
s
t
r
aight leg
adju
s
table glide
tube in
s
e
r
t
Note:
Inquire straight leg tables
can be fitted with glides or with
casters. Tables with canted legs
can be fitted only with glides.
5. To assemble glides into either
canted or straight legs, first place
a tube insert into the end of the
legs as illustrated (Figure 3). If
required, gently tap the insert into
place using a rubber mallet to seat
the insert fully. Finally, thread the
adjustable glide into the tube
insert to desired depth (Figure 3).
6. To assemble casters into straight
legs, first place a tube insert into
the end of the leg as shown
(Figure 4). If required, gently tap
the insert into place using a rubber
mallet to seat the insert fully.
Next, thread the caster mount into
the tube insert. Finally, push the
caster into the hole at the bottom
of the caster mount as illustrated
(Figure 4).
7. Carefully turn the Inquire Table to
the upright position and check it
for level and stability. Turn any
table glides or caster mounts in or
out to adjust legs for a level, stable
table.
Figure 4
tube in
s
e
r
t
c
a
s
te
r
c
a
s
te
r
mount
s
t
r
aight leg
