Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Assembly Instructions
Hiatus™
Sleeper Bench
May 2019
Tools Required
• Box Cutter Knife
• Phillips Screwdriver
• Pry Bar
Unpacking Bench Unit
1. Using a Phillips screwdriver, remove
the screws attaching the steel
brackets to the wooden container
supports (Figure 1 & Detail A).
2. The wooden supports are stapled
to the shipping pallet. Using a pry
bar, carefully remove the wooden
supports. Discard staples and the
wooden supports. Recycle any
cardboard (Figure 1 & Detail B).
3. Using a box cutter knife, carefully
cut around the pallet to remove the
plastic wrap covering the bench. Do
not allow the knife to make contact
with the bench.
wooden
support
steel
brackets
steel
bracket
screws
cardboard
shipping
carton
shipping
pallet
staple
Figure 1
Detail A
wooden
support
steel
bracket
steel
bracket
screws
steel bracket
screws
wooden
support
Detail B
shipping
pallet
staple
wooden
support
