KI CafeWay ECRCB Care & Maintenance Download

Page: 2 / 2

1330 Bellevue Street • P.O. Box 8100 • Green Bay, WI 54308-8100 • 1-800-424-2432 • www.ki.com

LATCH ADJUSTMENT

1. With the table in the use position, apply weight to the unit to hold it against the

floor. Using the allen wrench provided, turn the allen bolt, on the inside of the

center leg, clockwise to tighten the latch and counter-clockwise to loosen the

latch.

2. Test latch by removing weight from the table. Push down on the center of the

table and release the latch located on the upper center leg between the table

tops. Hold the latch in the released position and slowly lift the table 1 to 2

inches. Remove hand from the latch and with one hand on either table side lift

table into a tee position. Spring assists in the center legs will help you lift the

table to this position and will maintain the table in the tee position.

3. Push the table back down to the use position, Verify that the table latches lock

the unit down by pulling up lightly on the center of the table. The table should

rise no more than

”.

4. Retest release to verify smooth release.

5. Apply paraffin wax or approved lubricant to the strike area several times per

year.

Summary of Contents for CafeWay ECRCB

Page 1: ...steners monthly Check casters and latches for proper operation monthly Oil all points labeled 1 with a light weight oil twice per year Paraffin wax the center slide and latch assemblies labeled 2 twic...

Page 2: ...he table and release the latch located on the upper center leg between the table tops Hold the latch in the released position and slowly lift the table 1 to 2 inches Remove hand from the latch and wit...