5. Position the paper sorter up under
the overhead cabinet (Figure 4)
and secure it in position using 6”
angle brackets (mark and pre-drill
first) as illustrated in Figure 5.
Attach one 6” angle bracket at each
end, and two 6” angle brackets
equally spaced along the underside
back of the paper sorter assembly.
Use six #8 x
5
/
8
" wood screws per
bracket, securing paper sorter to
overhead cabinet back and side.
Caution: Six #8 x 1
1
/
4
" wood
screws are supplied and are
only to be used when secur-
ing bracket through optional
tackboard to back panel of
overhead cabinet.
6. Complete the installation of the
small 1
1
/
2
" bracket located at center
divider using #8 x
5
/
8
" screws
(Figure 5).
7. Re-install the task light and/or
valance to the underside of the
paper sorter as required.
Assemble units as described herein only. To do otherwise may
result in instability. All screws, nuts and bolts must be tight-
ened securely and must be checked periodically after assem-
bly. Failure to assemble properly, or to secure parts may result
in assembly failure and injury.
Aristotle™ Casegoods Overhead Paper Sorter
Assembly Instructions
2
6” angle b
r
a
c
ket
(at end)
6” angle b
r
a
c
ket
(at ba
c
k)
s
mall 1
1
/
2
” angle
b
r
a
c
ket
Figure 5
