Required
Tools
Disassembly Instructions
Material Type:
Warning: This drawing format requires special non-standard fonts!!
Make sure the appropriate font files are installed!!!
TT Humanst 521 BT Light
O HelveticaLTStd-Cond
O HelveticaLTStd-LightCond
Altus™ and Allude™ Task Seating
Page 2 of 2
Rev. 0
©2013 Krueger International, Inc. All Rights Reserved · P0033-0088
A . Steel
B. Plastic
C. Foam
D. Aluminum
KI · 1330 Bellevue Street · P.O. Box 8100 · Green Bay, WI 54308-8100 · 1-800-424-2432 · www.ki.com
All fasteners not explicitly tagged
are Material Type A: Steel
General Notes:
1. Disassembly time: 10-15 minutes
2. This procedure assumes basic familiarity with hand tools and
furniture terminology: no specialized training is required
3. All materials removed and disassembled shall be sorted and
segregated with like materials and disposed of or recycled
according to recycling availability or waste acceptance
4. For items to be recycled, refer to KI's End of Life Recycling
Matrix and KI's End of Life Recovery Options Matrix, available
at www.ki.com
Procedure:
3. Remove the screws holding the seat back and seat pan
onto the mechanism frame.
4. Pry off the plastic control knob and handles from the base
support mechanism.
Gloves
Safety Glasses
Pry Bar
Rubber Mallet
B
D
Allen Wrench
Philips Screwdriver
B
B
A
D
A
C
