26
IV. WHEELCHAIR USE & CONFIGURATION
O. Pro Elevating Leg Rest (Continued)
5. Raising/Lowering the Pro Elevating Leg Rest
Remove the Pro ELR from the chair or remove weight from the Pro ELR while lowering to avoid a
sudden drop when the lever lock is pushed. The calf pad can also swing outward to clear the
front of the chair during certain movements if necessary.
a. To raise the Pro ELR, lift the leg rest tube (Fig. 16:A) to the desired angle of elevation.
b. To lower the Pro ELR, press and hold the lever lock (Fig. 16:B) while pushing the leg rest
tube (Fig. 16:A) down.
c. Retighten the nut.
6. Adjusting the Knee Height
a. Use two 10mm socket wrenches to loosen the nuts (Fig. 17:A) on the cover.
b. Adjust the knee height to the desired setting.
c. Retighten the nuts to secure the knee height.
7. Removing the Pro Elevating Leg Rest
a. To remove the leg rest, push or pull the release latch.
b. Lift the leg rest straight upward to remove. You may also swing the leg rest inward or out
-
ward before lifting it off.
A
B
Fig. 16
A
1½” range
of motion
Fig. 17
Summary of Contents for Little Wawe Arc TTl
Page 1: ...2020 05 24 XP XPe TTL...
