44
Angle Adjustable Footrest
1. Install the footrest extension tubes (A) into the footrest adjustable clamp (G).
2. Install the footplate (E) onto the clamp and secure with two screws (D) and two nuts (H) using a 5mm
Allen wrench and a 10mm wrench. If a riser (F) is being used to elevate the footrest platform, install
between the footrest platform and the footrest adjustable clamp.
3. Install the footrest protectors (C) by peeling the backing off of the tape (B) and sticking the tape inside
the footrest protector. Peel the remaining backing off of the tape and snap footrest protectors onto the
footrest as seen below.
Apply tape to the
inside of the footrest
protectors.
Snap the footrest
protectors onto the
footrest.
Footplate
Width
Part No.
Width
000225
6.0"
001322
7.0"
000226
8.0"
001323
9.0"
000227
10.0"
001319
12.0"
Footrest
Tube
Width
Part No.
Width
000221
5.6"
000222
6.6"
000223
7.6"
000224
8.6"
000625
10.6"
A
B
C
G
H
D
E
F
0" Taper 1" Taper 2" Taper
10"
X00225
11"
X01322
12"
X00226 X00225
13"
X01323 X01322
14"
X00227 X00226
15"
X00227 X01323
16"
X01319 X00227 X00226
17"
X01319 X00227 X01323
18"
X01319 X01319 X00227
19"
X01319 X01319 X00227
20"
X01319 X01319 X01319
21"
X01319 X01319 X01319
22"
X01319 X01319 X01319
Footrest Part Number Matrix
Seat
Width
Front Seat Taper
