6
Packing your tent/awning
1.
Unpeg all pegging points and tie guy ropes up to prevent tangling
-
Leave just the corners and Storm Straps
pegged. Remove the fibreglass side pole and interior adjustable pole.
3.
Unpeg the remaining corners and Storm Straps
-
Tie Storm Straps up to prevent tangling.
4.
Fold the awning into sections, Keep folding until you end up with a long thin rectangle.
**TIP–
Check the width of your fold by comparing it against the width of the carry bag.
Needs to be slightly smaller to fit in easily
2.
To deflate the tent/awning unscrew the dust cap on the valve and depress the spring button on the valve,
repeat this on all the air tubes and the awning will then drop to the floor
-
leave a couple of doorways open slightly and this will allow air to escape from inside quickly.
