15
EN
How to Use
C
OPERATING AND PROGRAMMING
3.1 Cleaning Mode Selection
• Selection 3 - EDGE Cleaning Mode
• Selection 4 - Full GO Mode
EDGE Cleaning Mode
This mode is good for cleaning the edges
and corner of a room.
Place the appliance close to the wall or
along the border of the wall.
Full Go Mode
When the machine is powered ON, or in
the process of cleaning, or in charging
status, press the FULL GO button on the
remote controller to activate the status.
The machine will automatically start/
continue the cleaning again when the
unit is fully charged.
Note :
If the buzzer sounds 1 time - Full Go Mode
Activated.
If the buzzer sounds 2 times - Full Go
Mode INACTIVE.
4.0 Functional Button
Strong Power Button
In any of the cleaning mode, the appliance will run in
full-load (high speed).
Battery will drain faster than usual and operating time
will be shorter and dropped.
Note :
If the buzzer sounds 1 time - Strong Power Function Activated.
If the buzzers sounds 2 times - Strong Power Function INACTIVE.
36
Pengenalan Bahagian
BM
D
ALAT KAWALAN JAUH
Tolak slot ini dengan kuku
dan tarik keluar tray bateri
Pandangan
Belakang
Rajah
Penggantian
Bateri
1
2
Butang Kuasa ON/OFF
Butang OK
Butang Pilihan Arah
Butang Mod Membersih Auto
Butang Mengecas Semula Auto
Butang Mod Membersih “EDGE”
Butang Mod Membersih Setempat
Butang Mod Membersih "FULL GO"
Butang Kuasa Tinggi
1
2
3
4
5
6
7
8
9
D
HOME
AUTO
OK
1
2
4
7
3
6
9
8
5
Nota :
Masukkan sekeping bateri Lithium 3V (CR2025) ke
dalam alat kawalan jauh dengan menanggalkan
penutupnya di belakang alat kawalan jauh. Sila
rujuk rajah penggantian bateri untuk memasukkan
atau menukar bateri.
Nota: Polar ( + ) menghadap ke atas.
Summary of Contents for VC9X6A
Page 2: ......
