Step 5: If desirable, the grill can be fixed to the speaker
Step 6: The SDSS-disks can be put below the speaker
It is adviced to lift the speaker with two or more persons.
Important
Important
The grill which is magnetic, will automatically be fixed to the speaker if
positioned correctly. Do not apply force inside or upwards direction.
If you want to remove the grill, the grill must be grabbed with both hands.
You will find a short wire fixed to the connection terminal. This wire is fixed to
protect the speaker drivers during transport, make sure to remove this wire
before installing your cables.
Important
The speaker can be leveled to stabilize the speaker by adjusting one or more SDSS-spike
orientation(s). The hole in the spike can be used to do this.
11
10
At the rear of your Elegance loudspeaker you will find the
high-end Kharma Connection Terminal (as shown below).
Be sure you use the same brand, type and length of
speaker cable on each channel.
Bi wire connection (on dB11-s)
Some models have a bi-wire terminal. If you want to
connect one pair of cables make sure the switch is set to
“single wire”. Connect the cable to the left connector.
When you are going to bi amp or bi wire your speakers,
the switch should be set to “bi-wire”. Connect the cables
for mid/high to the left connector and for low to the
right connector.
CONNECTION
Important
Always turn off the power of your entire system before making connections
to your speakers.