manualshive.com logo in svg

Kguard PLM00, Web Client Manual, Page: 26 / 29

Share
Download
Kguard PLM00 Web Client Manual Download Page 26

26

WiFi IP Camera User’s Manual

Web Client

Synchronize With Computer Time

: Click to synchronize the time of the IP camera with the current time of your 

notebook. After checking this option, the date and time configurations will be disabled as displayed below.

Users

Configure the user accounts. Click on the user account that you want to modify. 

User Name/Password

: Enter 

new login credentials for the user.

Confirm

: Re-type the password 

to confirm.

Active

: Select 

Enable

 to activate 

the user account or 

Disable

 to 

disable the user account.

Password

: Select 

Enable

 to 

require a password at login 

or 

Disable

 to login without a 

password.

User Privilege

: Check the user account privilege(s). The available options include configuring system parameters 

(

Parameter Setting

), view 

Live

 screen, and use 

Playback

.

NOTE

: The admin can assign one user to manage the alarm sensor configurations.

Info

View the system related information. 

NOTE

: If you need to scan the 

QR code of the IP camera but 

the sticker with the code on the 

device has got damaged or is 

out of reach, then here you can 

find the device’s QR code.

Summary of Contents for PLM00






























Reviews:

No comments