
KGUARD Standalone DVR KG-SHA104/108 User Manual
8
www.kguardsecurity.com
4. Install HDD on the bracket, fixed with screws firmly.
5. Check if the connectors are properly connected and there is no problem with wiring and close up
cover, and fix it with screws.
3.2. Camera and Monitor Connection
Connect camera cable to video input port of DVR, and from video output of DVR to Monitor via BNC
connector or VGA port (refer to system figuration on Chapter 9.6).
If the camera is a PTZ speed dome, you could connect RS485 A & B to the corresponding port on
DVR respectively (refer to system figuration on Chapter 9.6).
3.3. Power Supply connection
Please only use the power adapter supplied with the DVR.