NAUT324C-256K
- Technical reference - Rev. B
Page 35
16.3.7. Select
Font
[Designation] Select font
[Format] ASCII
ESC P
<Font No.>
Hex 1B 50 n
Decimal 27 80 n
[Description] Font no. is a binary value and starts with zero.
(The printer starts to work with font zero as default).
The change of font command will be effective from the start of the line in which it was given.
It is not possible to mix different fonts in one line.
16.3.8. Font
order
The NAUT printer comes with 5 fonts installed in the following order:
Font 0: GB2_13x24 (13x24 pixels)
Font 1: GB2_14x22 (14x22 pixels)
Font 2: GB2_12x24 (12x24 pixels)
Font 3: GB1_8x16 (8x16 pixels)
Font 4: KYR_8x16 (8x16 pixels), Cyrillic.
Note :
As factory set up, the printer uses the GB2_13x24 (default font), also the fonts No. 5,6,7
16.3.9.
Horizontal Text Zoom
[Designation] Horizontal text zoom
[Format] ASCII
ESC W
n
Hex 1B 57 n
Decimal 27 87 n
[Description] This command will go in effect with the letter after which it was given.
The following widths are possible:
n= 0: single (default)
1: double
2: fourfold
3: eightfold
16.3.10. Vertical
Text
Zoom
[Designation] Vertical Text Zoom
[Format] ASCII
ESC H
n
Hex 1B 48 n
Decimal 27 72 n
[Description] This command will go in effect from the line in which it was given, for the complete
line.
It is not possible to mix different heights within one line.
Available heights:
n:= 0: single (default)
1: double
2: triple
to 7 : eightfold
