background image

1

MODEL #A3000 – 3,000LB (1361KG) WINCH

INTRODUCTION

InTroduCTIon

Congratulations on your purchase of a KFI winch. KFI 
researches and develops winches to strict specifications. 
With proper use and maintenance, this winch will bring 
years of satisfying service.

Accessories

Kappers Fabricating, Inc. manufactures, purchases, and 
sells accessories designed to help you get the most from 
your purchase. To find out more about our products, visit 
our web site at:

www.kfiproducts.com

This Manual

Every effort has been made to ensure the accuracy and 
completeness of information in this manual. We reserve 
the right to change, alter, and or improve the product and 
this document at any time without prior notice.

KFI TECHNICAL SUPPORT TEAM

1-877-346-2050

MODEL NUMBER

A3000

SERIAL NUMBER

DATE OF PURCHASE

PURCHASE LOCATION

safeTy defInITIons

The purpose of safety symbols is to attract your 
attention to possible dangers. The safety symbols, and 
their explanations, deserve your careful attentions and 
understanding. The safety warnings do not by themselves 
eliminate any danger. The instructions or warnings they 
give are not substitutes for proper accident prevention 
measures.

Record the model as well as date and place of purchase 
for future reference. Have this information available when 
ordering parts and when making technical or warranty 
inquiries.

danGer

DANGER indicates a hazardous 

situation which, if not avoided, will result in death or 
serious injury.

WarnInG

WARNING indicates a hazardous 

situation which, if not avoided, could result in death 
or serious injury.

CauTIon

CAUTION indicates a hazardous 

situation which, if not avoided, could result in minor 
or moderate injury.

noTICe

NOTICE indicates information 

considered important, but not hazard-related (e.g. 
messages relating to property damage or physical 
injury).

Summary of Contents for A3000

























Reviews: