©2019 Copyright Kappers Fabricating, Inc. All rights reserved
3
WIRING INFORMATION
1. For power location (G) please see Figure 10. The contactor
will mount below arrow (F) in Figure 10 on this machine. You
will see four formed holes on the fire wall.
2. Wire your winch per your winch installation instruction.
3. Route winch switch wiring from contactor to the switch panel
(H). Please see winch owners manual wiring instruction for
dash rocker or mini rocker.
4. Mini-Rocker Switch Hardware Kit (HK-31). This allows you
to mount your usual handle bar mounted switch to almost any
desired location.
a. Remove handlebar mount hardware from the switch.
b. Locate desired mounting location.
c. Mark and drill two switch holes through dash
using switch housing as a template.
d. Drill a 3rd hole for the switch wiring.
e. Assemble per figure 12 using HK-031 hardware.
5. Find a location that suits your purposes for the mini rocker
switch and hand remote.
“Figure 12” Mini-Rocker Mounting
F
G
“Figure 10” Power & Ground Under hood
When installing your switch in the dash
panel, use dash rocker switch as template
as some machines have larger switch
templates.
CAUTION
“Figure 11” Switch Panel
H
Positive Battery (+)
Negative Battery (-)
Keyed (12v) /Accessory
