KFD STO MAX 7, Installation And Operation Manual

Page: 12 / 24

„Installation and operation manual“
12
Way of disassembling deflector
To assembly deflector you need to do the same actions as during deflector removal.
Deflector mounting channel must be put into proper place on the back plate.
To clean deflector use brush.
3.2.5 Summer break in device usage.
When the air humidity in the room where the fireplace is installed is high, put inside the stove
substance which absorb humidity.
3.3 Fuel for the stove
Regardless of the class, type or brand of stove it is important to use only proper fuel. The
only wood which must be used is wood from leafy trees. It should be seasoned for minimum
18 months on free air under some shelter. Wood must be chopped and seasoned on the
fresh air. This will guarantee that stove will work perfectly and it will stay in good condition.
One cubic meter of wood which has got 20% moisture consists about 60 l. of water. This
amount of wood two months after being cut has got about 350 l of water. Using this type of
wood will lead to glass getting dirty.
There should be maximum 2-3 logs of wood in fireplaces hearth. It should be 20-40 long. The
best diameter of logs is between 12 and 15 cm. Do not use briquette, coal, trashes, wet
wood, painted wood or plastic as fireplaces fuel. When you use those products you
automatically will lose warranty. Use paper only for lighting the device up.
3.4 Hints for users
! Forbidden fuel for stoves: coal and its derivatives, briquette, hay, carpentry
scraps, wood with moisture under 10%, plastic and trash. It is also forbidden to
use flammable chemical agents for lighting up.
! Never extinguish fire with water.
! Do not touch device when it is working because you might get burned. During
its work it is necessary to use safety gloves.
! It is important to clean the ash tray often to prevent it from fill.
! Do not leave stove working without ash drawer inside.
! Do not leave working stove with door open without supervision.