„Installation and operation manual for fireplace insert”
KFDECOENG1.1562012
2
KFDECOENG1.30072014
The fireplace insert is a heating and decorative device, allowing construction of a complete heating
system based on distribution of hot air. It is not an autonomous heating device but a component of the
heating system. Due to the above reasons, its operation and safety largely depends on the method of
installation and materials used. Considering that, it is recommended that installation of the insert is
commissioned to an Authorised KFD Fitter, guaranteeing an appropriate standard of service.
Installation of the fireplace must be performed in compliance with applicable regulations (table 5).
All domestic and local regulations ought to be observed.
Ventilation conditions for KFD ECO fireplace insert installation
................................................................................. 10
Installation of the fireplace enclosure
Connection of hot air distribution pipes in the hood
Protection of the beam in the fireplace enclosure
Determination of heating power of the device
Adjustment of combustion air supply
Adjustment of primary air supply
– impact of primary air supply adjustment
......................................................................... 20