KFD 5161 L Installation And Operation Manual Download Page 27 | Manualshive

Page: 27 / 36

background image

„Installation and operation manual for fireplace insert”

KFDECOENG1.1562012

27

Table 5. Norms and regulations.

Regulation of the Minister of Infrastructure of 12 April 2002 on technical conditions to be met by
buildings and their situation (

Journal of Laws № 75, item 690)

Regulation of the Minister of Infrastructure of 7 April 2004 amending the regulation on technical
conditions to be met by buildings and their situation

Regulation of the Minister of Infrastructure of 6 November 2008 amending the regulation on technical
conditions to be met by buildings and their situation

Regulation of the Minister of Infrastructure of 12 March 2009 amending the regulation on technical
conditions to be met by buildings and their situation

PN-89/B-10425 Flues, exhaust gas ducts and brick ventilation ducts

– Technical requirements and

inspection upon acceptance

PN-EN 13229 Fireplace inserts with open solid fuel fireplaces. Requirements and tests, December
2002

AMENDMENT TO THE POLISH NORM PN-EN 13229:2002/A1 March 2005

AMENDMENT TO THE POLISH NORM PN-EN 13229:2002/A2 June 2006

PN-EN 1443: 2001 Chimneys. General requirements.

PN-EN 1443: 2005 Chimneys. General requirements.

PN

–87/B-02411 Integrated solid fuel boiler rooms.

PN-91/B-02413 Heating and heat engineering. Protection of water heating installations of the open
system.

All the operations recommendations and tips contained in this manual
ought to be checked against local regulations respectively!!!

«
...
25
26
27
28
29
...
»

Summary of Contents for 5161 L





































Reviews:

No comments

Related manuals for 5161 L

Brand: baltur Pages: 76

Brand: Remii Pages: 26

Brand: Blue Rhino Pages: 16

Brand: Majestic Pages: 8

Brand: HAMPTONBAY Pages: 30

Ascent Linear Premium Series

Brand: Napoleon Pages: 136

CASUAL FIRESIDE Basso 5150-36RDC

Brand: O.W. Lee Pages: 28

Imperial Carousel

Brand: Malm Fireplaces Pages: 8

Brand: Napoleon Pages: 108

Brand: Desa Pages: 28

Brand: pleasant hearth Pages: 12

HKI Leo 28/9251

Brand: Olsberg Pages: 37

Brand: Napoleon Pages: 2

Luna Diamond Series

Brand: M Design Pages: 36

Brand: Fire Stone Pages: 9

Brand: Evonicfires Pages: 29

Brand: Pacific energy Pages: 20

Brand: SBI Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands