Keystone KSTAP12A, Owner'S Manual

Page: 13 / 39

OPERATING INSTRUCTIONS
10
6 WATER DRAINAGE:
During dehumidifying mode:
- Remove the drain plug from the back of the unit,
- You can also install the drain connector (5/8" universal female mender) with 3/4" hose (locally
purchased by consumer) for garden hose use.
attach a section of drain hose (included with
this unit) to the hole. Place the open end of the hose directly over the drain area in your
basement floor or in a water container (see Fig.4 & 5).
When the water level of the bottom tray reaches a predetermined level,
and the unit stops operation. Carefully move the unit to a drain
location, remove the bottom drain plug and let the water drain away (Fig.6). Restart the machine
until the P1 symbol disappears. If the error repeats, call for service.
-
NOTE:
" "
the unit beeps 8 times,
the digital display area shows P1
" "
Remove the
drai n plug
Fig .4
Continuous
drain hose
Fig .5 F ig.6