Essential Programming Sections
How to Record the Voice Messages :
Quick guide: Press 1 2 3 4 > RECORD > 1 > ENTER > Record message now > ENTER.
1) Key in the four digit user PASSWORD code (factory default 1234).
2) Press RECORD.
3) Press 1 (to record the message for Trigger 1) or 2 (to record the message for Trigger 2).
4) Press ENTER to start recording the message. You now have 10 seconds to record your message.
5) Press ENTER to stop the recording and save, or wait for the 10 seconds to end.
How to Play Back the Voice Messages :
Quick guide: Press 1 2 3 4 > PLAY > 1 > ENTER to play back the recorded messages.
1) Key in the four digit user PASSWORD code (factory default 1234).
2) Press PLAY.
3) Press 1 (to listen to the message recorded for Trigger 1) or 2 (to listen to the message for Trigger 2).
4) Press ENTER to start listening to the message.
5) Press ESC to stop listening at any time or wait until the messages stops playing.
How to change the User PASSWORD :
(factory default 1234)
Quick guide: Press 1234 > PASSWORD > New Code > Reconfirm New Code
1. Key in the four digit user <PASSWORD> code. Factory default 1234.
2. Press PASSWORD.
3. The LCD will change to n-p.
4. Key in your new four digit <PASSWORD> code.
5. The LCD will change to c-p.
6. Key in your new four digit <PASSWORD> code again.
7. The LCD will change to acc.
How to Program Phone Numbers
– Section 3:
You can enter a maximum of nine telephone numbers for the triggers, each number can be a maximum of 32
digits. Quick guide: Press 1 2 3 4 > PROGRAM > 3 > ENTER > 1 > ENTER > Telephone number > ENTER
1. Key in the four digit user PASSWORD code (factory default 1234).
2. Press PROGRAM > 3 > ENTER > 1. The number you press after the ENTER button will select the position in
the sequence you want that telephone number to dial (1=1st number called, 2= 2nd number called).
3. Press ENTER again and then Key in the first telephone number. Press ENTER to save and Programming
mode is now exited.
4. Repeat the process until you have entered all the numbers you wish the Auto Dialer to call once it has
been triggered (maximum 9 different numbers).
IMPORTANT: Enter the symbol *
to create a “pause”. So, if you are using the AD-01 with an exchange
line that requires a number (such as “9”) followed by a “pause” before dial-out, enter >9>*>Tel number
How to Delete Phone Numbers
– Section 3 :
Quick guide: Press 1 2 3 4 > PROGRAM > 3 > ENTER > 1 > ENTER > ESC
1. Key in the four digit user Password code (factory default 1234).
2. Press PROGRAM > 3 > ENTER. Select the position for the telephone number you want to delete (1=1st
number called, 2= 2nd number called), press ENTER.
3. Press ESC to Delete that number. Programming mode is now exited.
IMPORTANT: Pressing ESC at stage 3 will Delete a telephone number. Do NOT press ESC if you are
trying to program numbers into the dialer.
