TABLE PLATE
1/2" S.S. HEX
HEAD NUT
1/2" S.S. FLAT WASHER
1/2" x 1 1/2" S.S. HEX
HEAD CAP SCREW
SCREW ASSEMBLY
TYP. 6 PLACES
BRACES
Legs to Table Plate
1. Place table plate on pedestal, aligning the holes on the table
plate with the holes on the pedestal.
2. Add 1/2” washer to 1/2” x 1 1/2” cap screw and insert down
through the hole in the table plate and pedestal/legs.
3. Slide 1/2” washer and 1/2” lock washer over exposed
threads and add 1/2” nut and tighten.
4. After tightening table plate down, tighten brace screws.
Legs / Table Plate Assembly to Table Top
1. Place table top over leg/table plate assembly, making sure
to align the holes in the table mounting plate with the nuts
under the table.
2. Place 3/8” flat washer over 3/8” x 1” hex head cap screw
and insert up through holes in mounting plate and thread
into nuts.
3. Tighten hex head cap screws into nuts under table.
(Shown upside down and without legs for clarity.)
ASSEMBLY INSTRUCTIONS (con’t)
EASTON 6-SEAT TABLE SET
KEYSTONE RIDGE DESIGNS, INC.
670 Mercer Road | Butler, PA 16001-1840
Toll-free: 1-800-284-8208 | Phone: 724-284-1213
www.keystoneridgedesigns.com
