Manual KSK-8022BT
* Hint:
The indicators for the NUM lock and the caps lock are continuously glowing as long as the
keyboard is in use. About 10 sec. after the keyboard isn‘t operated anymore, the LED will turn off to
save as much energy as possible.
Power switch
The power switch is located at the rear side of the keyboard. The red mark indicates that the switch is
in „off“ position and the green mark indicates „on“ position.
Micro USB charging port
The battery of the KSK-8022BT can be charged comfortably via the micro USB port with the provided
USB cable*
* Hint:
the micro USB port is just for battery charging. There is no data transfer function included. If the
battery is not charged with the original accessories, problems may occur during signal transmission if
the keyboard is used simultaneously.
3. Connect the keyboard via Bluetooth
®
3.1
Make sure that the keyboard battery is sufficiently charged.
3.2
Switch on the system you want to pair (smartphone, laptop, PC etc.) and, if necessary, activate
3.3
Depending on the channel through which the device should be connected, press
and hold
fn
+
1
,
2
or
3
for at least 3 seconds. The connection LED (
3.
) now starts flashing white.
3.4
Go to the Bluetooth
®
menu and select „KSK-8022BT“. It is marked with a keyboard symbol.
3.5
The coupling of the devices was successful when the LED (
3.
) stops flashing.
3.6
Now select the appropriate layout by pressing
fn
+
A
(MAC)
for macOS
®
,
fn
+
S
(Windows)
for
Windows
®
and
fn
+
A
(Android)
for Android. The factory setting is the Windows
®
layout.
3.7
If you have already connected your device to the KSK-8022BT once and the profile is saved on
your device (standard), then you can conveniently switch between the devices, e.g.: Your smartphone
is paired on channel 1. Your tablet on channel 2 and your PC on channel 3.
Summary of Contents for KSK-8022BT
Page 18: ......
