Manual KSK-8001BTS
3. Connect keyboard via Bluetooth
3.1
Make sure that the battery of the keyboard is sufficiently charged. You can see this by the fact that
the LED for operation lights up either green (sufficiently charged) or red (not sufficiently charged) for
the first 5 seconds after switching on. If the LED is red, leave the keyboard exposed to light for at least
30-60 minutes until the LED is green for 5 seconds.
3.2
Switch on the system you wish to pair (smartphone, laptop, PC, etc.) and, if necessary, activate
Bluetooth. Switch on the KSK-8001BTS.
3.3
To pair the keyboard, press
Fn
and hold
P
for at least 3 seconds. The LED for Bluetooth
®
connecti-
on will now start flashing green.
3.4
Go to the Bluetooth menu and select the device „KSK-8001BTS“ marked as keyboard. The cou-
pling of the devices was successful when the LED for Bluetooth
®
no longer flashes.
3.5
Now simply select the desired layout by pressing
Fn + D
for macOS
®
/iOS
®
,
Fn + A
for Windows
®
and
Fn + S
for Android.
The default setting of the keyboard is the Windows
®
layout.
Tip:
Avoid dirt on the Solar modules, to always achieve the best possible load efficiency.
Summary of Contents for KSK-8001BTS
Page 14: ......
