Operation Manual
Intuition-XL
(ACK-5600 ALU+)
E&OE
- 6 -
2. Installation of keyboard
2.1 System Requirements
This keyboard requires a PC with USB connection and one of the following operating systems:
Windows 98SE / ME / 2000 / XP / Vista
For the installation of the keyboard under the mentioned above operating systems you need
NO
special
driver!
2.2 Installation of the keyboard
In order to install your keyboard, please perform the following steps:
•
Connect your keyboard to a free USB port on your computer.
•
All state-of-the-art operating systems with Plug & Play support will recognize your keyboard automatically
and load the required drivers. During the phase of installation your operating system informs you via
changing Pop-up information windows on the task-bar about the current status of installation. Please be
patient, until the system informs you finally about the successful installation. The keyboard is now ready
for operation.
Older operating systems do not always support automatic hardware recognition. If you have attached your
keyboard via USB, and exactly this error occurs on your system, you have the following alternatives to solve
the problem:
•
Perform an update of your operating system and return to Step 2.2
•
In some cases the installation CD of your operating system is necessary according to the instructions on
your screen. In this circumstance please follow these instructions.
•
Check whether your
BIOS
system supports USB keyboards
*
. Some main board manufacturers offer
BIOS
up-dates in the Internet for downloading.
•
Ensure in your system settings, that the used USB connection was not deactivated in your operating
system
*
.
•
Should your system-updates keep out of success, it is recommendable to test the keyboard with another
PC with the same operating system to rule out a hardware damage of the USB
Receiver
.
* Refer to the documentation of your PC for details.
Summary of Contents for INTUITION-XL ACK-5600 ALU+
Page 2: ......
