20
Keysight X8712A IoT Device Battery Life Optimization Solution User’s Guide
System and Installation Requirements
PC operating system
– Windows 7 SP1 (64-bit)
– Windows 10 (64-bit)
Characteristics
For characteristics of this solution, refer to the data sheet at
http://literature.cdn.keysight.com/litweb/pdf/5992-3085EN.pdf
Common User Setups
Based on the above mentioned hardware, the following section illustrates
examples of hardware setup depending on your choice of DUT and test
requirement.
– Two-channel Configuration on
– Option 1: Connect an over-the-air DUT with self advertising or in test mode
– Option 2: Pair an external companion device in signaling mode
– Four-channel Configuration on
– Sense voltage or current response to synchronize the events
– Two-Channel Configuration for Non-RF events on
– Sense voltage or current response without the use of Channel 2 set to
‘Power Detector’ function. This is the typical setup when installing a
double-wide SMU module in the N6705C as it will occupy two slots in the
N6705C and disable the use of Channel 2 to detect RF power.
