Keysight U8903B, User Manual

Page: 49 / 605

Getting Started 1
Keysight U8903B User’s Guide 49
Add or remove U8903B options
Perform the following procedure to add U8903B options.
1 Press on the SYSTEM panel.
2 From the System menu page, press the Service softkey.
3 From the Service menu page, press the Options softkey. The Options menu page is
displayed as shown in Figure 1-9 .
Figure 1-9 System > Service > Options menu page
4 Press the Add option softkey, and the Recall menu page is displayed to enable you to
select the U8903B option file.
5 Select the U8903B option file to be loaded, and press the Recall softkey as shown in
Figure 1-10 .
Table 1-8 System > Service > Options menu page
Menu Description
Add Option
Press the Add Option softkey to load the U8903B option file. The Recall menu page will be displayed to select the
source location.
Remove Option Press the Remove Option softkey to remove the selected U8903B option.