Keysight U8903B, User Manual

Page: 295 / 605

Test Sequence Application 7
Keysight U8903B User’s Guide 295
Project
The TSA > Project menu page is displayed as shown in Figure 7-3 .
Figure 7-3 TSA > Project menu page
Press the up or down arrow key to select the test sequence, IO configuration, or
measurements tabs. The respective menu page will be displayed. Refer to “
Test Sequence ”
on page 297 , “ IO Configuration ” on page 298 , and “ Measurements ” on page 310 for more
information.
Table 7-2 TSA > Project menu description
Menu Description
New Project Press the New Project softkey to create a new project.
Open Project
Press the Open Project softkey to load a project from a file. Refer to “ Recall ” on page 95 for more information on the
Recall menu page.
Save Project
Press the Save Project softkey to save the project to a file. Refer to “ Save ” on page 94 for more information on the Save
menu page.
Properties
Press the Properties softkey to configure the project properties. Refer to “ Properties ” on page 296 for more information
on the Properties menu page.