background image

3

Specifications

22

Keysight U7228A/C/F Operating and Service Manual

General Specifications

Specifications

Specifications refer to the performance standards or limits against which the 

U7228A/C/F is tested.

Typical characteristics are included for additional information only and they are 

not specifications. These are denoted as "typical", "nominal", or "approximate", 

and are printed in italic.

Table 3-1

U7228A/C/F specifications

[a]

Specification

U7228A

U7228C

U7228F

Frequency

10 MHz to 4 GHz

100 MHz to 26.5 GHz

2 to 50 GHz

Gain (dB)

[b]

 >16 (10 to 100 MHz)

>0.26F + 16.1 

(100 MHz to 26.5 GHz)

>0.23F + 16.5 

(2 to 50 GHz)

 >0.5F + 17 (100 MHz to 4 GHz)

Input return loss
(Input SWR)

 >5 dB (3.57) 

(10 to 100 MHz)

 >8 dB (2.32) 

(2 to 40 GHz)

>6 dB (3.00) 

(40 to 44 GHz)

>5 dB (3.57) 

(44 to 50 GHz)

>13.5 dB (1.54) 

(100 MHz to 2 GHz)

>15 dB (1.43) 

(100 MHz to 4 GHz)

>11.5 dB (1.73) 

(2 to 3 GHz)

 >8 dB (2.32) 

(4 to 26.5 GHz)

>10 dB (1.93) 

(3 to 4 GHz)

Output return loss
(Output SWR)

 >18 dB (1.29) 

(10 MHz to 4 GHz)

 >18 dB (1.29) 

(100 MHz to 4 GHz)

 >11 dB (1.78) 

(4 to 26.5 GHz)

>18 dB (1.29) 

(2 to 4 GHz)

>11 dB (1.78) 

(4 to 26.5 GHz)

>8 dB (2.32) 

(26.5 to 40 GHz)

>6 dB (3.00) 

(40 to 50 GHz)

Summary of Contents for U7228A










































Reviews: