Keysight P9241, Scpi Programmer'S Manual

Page: 1086 / 1344

1086 Keysight P9241/42/43A Oscilloscopes SCPI Programmer's Guide
32
:WMEMory<r> Commands
:WMEMory<r>:SAVE
(see page 1196 )
Command Syntax
:WMEMory<r>:SAVE <source>
<r> ::= 1 to (# ref waveforms) in NR1 format
<source> ::= {CHANnel<n> | FUNCtion<m> | MATH<m>}
<n> ::= 1 to (# analog channels) in NR1 format
<m> ::= 1 to (# math functions) in NR1 format
The :WMEMory<r>:SAVE command copies the analog channel or math function
waveform to the specified reference waveform location.
Reference waveforms are limited to 64K points. If necessary, decimation of the
source waveform will occur during the save.
See Also • Chapter 32 , “:WMEMory<r> Commands,” starting on page 1081
• ":WMEMory<r>:DISPlay" on page 1084
NOTE
Math functions whose x-axis is not frequency can be saved as reference waveforms.
NOTE
:WMEMory<r>:SAVE is an overlapped command (see Chapter 4 , “Sequential (Blocking) vs.
Overlapped Commands,” starting on page 57).