Keysight N9923A, User Manual, Page: 202 / 276

202 Keysight N9923-90001 User’s Guide
File Management
Saving and Recalling Files
—Press
Backspace
to erase the last character from the end of the
selected keyword.
—Press
Shift to change from upper-case to lower-case and vice versa.
—Press Alt Keywords to toggle through different keyword choices.
How to move the cursor:
— Use the rotary knob to move the cursor along the same row. The cursor will
change rows when it comes to a row end.
— Use the arrows to move the cursor up and down between rows.
When the selected keyword is complete:
— Press
Done
to save all keywords and close the Edit Keywords labeler. These
keywords will exist on the FieldFox until changed.
— Press
Cancel
to close the labeler without saving changes.
Prefixes and Suffixes for Filenames
The prefix and suffix (Auto Append) can be used together to organize files.
Once set and enabled, they are automatically entered as the beginning (Prefix)
and end (Suffix - using Auto Append) of a filename when performing a Save
operation. These settings are persistent, until disabled. Refer to
“How to edit
the Prefix and Suffix (Auto Append)” on page 202
and
“How to enable/disable
Auto Append (Suffix) ” on page 204
.
This section contains the following sections:
— “How to edit the Prefix and Suffix (Auto Append)” on page 202 .
— “How to move the cursor” on page 194 .
— “When the Prefix is complete” on page 204 .
— “How to enable/disable Auto Append (Suffix) ” on page 204 .
How to edit the Prefix and Suffix (Auto Append)
If you want to edit a prefix on a finite set of files one time, refer to
“Manage
Files” on page 199 .
— Press
Save/Recall 9
— Then
More
— Then
Prefix Suffix
If you are only interested in adding a prefix or a suffix to a new file or files
one time, refer to “Manage Files” on page 199
.