Keysight N9923A, User Manual, Page: 196 / 276

196 Keysight N9923-90001 User’s Guide
File Management
Saving and Recalling Files
— Then
Device
to be copied from (i.e., Internal, SD, or USB). Refer to
“Set
File Type and Select Device” on page 196
.
— Then
More
— Then Manage Files
— Then
Select Files
— Navigate to the file(s) to be copied using the Up/Down arrow keys or the
knob.
— Then
Copy
—Select the destination device using the softkeys:
——
Copy to Internal
Copies to FieldFox’s internal memory.
——
Copy to USB
Copies to a USB memory device.
——
Copy to SD Card
Copies to a SD/SDHC memory card.
——
Cancel
to cancel copy file and return to the previous menu
— Use the close folder icon or the open folder icon to locate the target folder
for your files.
— Then
Do Copy
copies files to selected location and FieldFox displays a
confirmation message of a successful file copy.
—
Cancel
to cancel copy file and return to the previous menu.
Set File Type and Select Device
The following File TYPE and DEVICE settings are used to determine the type of
file to save, and the location to be used for all file operations.
These two settings remain through an instrument preset, but are reset to the
default values when the FieldFox power is shutdown.
Select Device (location of File Save/Recall)
— Press
Save/Recall 9
— Then
Device
to set the
LOCATION
where the file is to be saved, recalled, or
moved. Choose from the following:
—
Internal
Saves/Recalls/Moves (Copies) files to/from the FieldFox
internal memory. To specify a folder, first select Manage Folders
(learn how in
“Manage Folders” on page 200
). The Data Link software
will read data ONLY from the \UserData folder.
—
SD Card
Saves/Recalls/Moves (Copies) files to/from the SD card (not
included), inserted in the card slot. See
“Take the FieldFox Tour” on
page 27 . Only the root folder is available.