Security Features and Document of Volatility 34
User and Remote Interface Security Measures
SD Memory Card
2.
To log off, click the Windows
Start
button, then select
Shut down > Log off
from
the Windows Start menu, as shown in
below.
Figure 8-1
Windows Log off Control
3.
After you have logged on to the instrument as the Administrator, restart the Keysight
XSA application.
4.
When the XSA application has fully initialized (that is, when the main results view and
softkey menu are visible), press the
System
front-panel key.
5.
From the System softkey menu, select:
More
>
Security
>
USB
.
6.
Select the option
Read Only
.
7.
To activate the configuration change, either log out and then back in under your usual
user name (which by default is "instrument"), or cycle the instrument power.
SD Memory Card
The SD Memory Card can either be write protected, or removed from the
instrument.
— To remove the SD Memory Card, follow the instructions in
Card Removal Procedure” on page 30
— To write protect the SD Memory Card, first remove it from the instrument, as
above. The SD Memory Card features a Lock switch that, when set, prevents
the writing of data to the card.
Write protecting or removing the SD Memory Card does not interfere with
normal operation of the instrument operating system or the instrument
application software.