Keysight N8973B, Security Features And Document Of Volatility, Page: 39 / 46

Security Features and Document of Volatility 39
Special Options
Option SF2
— Save
N O T E
Save and Recall are often used with the N9069C Noise Figure Measurement
Application to allow multiple noise sources to be used without the need to
re-enter ENR values or to perform the noise source calibration each time a
different noise source is connected. When Option SF2 is installed, this
functionality is not available.
File Menu
The Page Setup , Print , Quick Save , Recall and Save icons are not available.
Preset Menu
The User Preset , Save User Preset , and User Preset All Modes icons are not
available.
System Menu
In the System > Power On menu, the Power On Type selection keys ( Mode
Preset, User Preset and Last State ) are not available.
Disabled SCPI Commands
The following SCPI commands are not available. Attempting to use any of
these commands generates the Error message:
–113,”Undefined header"
.
Note that some of the commands listed are specific to individual applications,
thus the set of available commands depends on which applications are
licensed for a given instrument.
IEEE 488.2 Common Commands (*)
—
*RCL
—
*SAV
MMEMory Subsystem
—
:MMEMory:CLEar:ALL
—
:MMEMory:CLEar:STATe
—
:MMEMory:COMMent
—
:MMEMory:COPY:DEVice
—
:MMEMory:INITialize
—
:MMEMory:LOAD:ALIMit
—
:MMEMory:LOAD:ALISt
—
:MMEMory:LOAD:ATRace
—
:MMEMory:LOAD:AUTO