Keysight N5990A-155 DisplayPort User Guide
99
Sink Calibration Procedures
5
Variable Parameter Test
Purpose and Method
This test lets you select a wide variety of combinations for all relevant
parameters, such as jitter frequencies and amplitudes as well as voltage
levels, to test your device against.
First, the combination of parameters can be selected in the Variable
Parameter Test window (see
). Then, the BER error test is run by
clicking the “Test receiver and Add Entry” button. The test can be
performed as many times as desired with different selections of
parameters. Finally, when the “Finish Test” button is clicked, the results
are saved in an Excel file.
Figure 43
Variable Parameter Test window
Connection Diagram
Summary of Contents for N5990A-155
