Keysight N5224B, Service Manual

Page: 59 / 614

Keysight N5224B/25B Service Guide 3-27
Tests and Adjustments
System Verification
4. If the analyzer still fails the test, check the measurement calibration by
viewing the error terms as described in “Accessing Error Terms” on
page 8-92 .
5. Refer to Figure 3-11 for additional troubleshooting steps.
Figure 3-11 System Verification Failure Flowchart
Interpreting the Verification Results
Figure 3-12 shows an example of typical verification results with Print Tabular
Data selected in the Printer Output area of the System Verification dialog box.
At the top of the printed output is the name of the device, the serial number of
the device, and the date tested.