Using N2825A Probe Heads
3
To Identify the R
SENSE
Resistance Using an ID Resistor
N2820/1A User’s Guide
57
Figure 25
Remove PC Board
4
On the reverse side of the PC board, locate ID resistor,
R2
, as
shown in
.
Figure 26
Location of ID Resistor (R2)
5
Replace the ID resistor with any of the values listed in
default value loaded on the board is 16.2 k
Ω.
You can purchase a
resistor from a supplier such as Digi-Key corporation.
CAUTION
If you are
not
skilled in soldering, ask a trained assembler to change the
resistor.
Summary of Contents for N2820A
