Keysight M8000 Series Getting Started Manual Download Page 6

Page: 6 / 58

Keysight M8040A High-Performance BERT Getting Started Guide

About This Guide

This guide provides high-level information for an initial setup of the Keysight J-BERT

M8040A High-Performance BERT. This guide focuses on setting up “bundled” systems

such as the M8040A-BU1, M8040A-BU2 and M8040A-BU3.
The M8040A-BU1 system has the M8000 module(s), M9537A AXIe Embedded Host

Computer, M8070B software plus license, and module licenses pre-installed.
The M8040A-BU2 bundled systems has the M8000 module(s) and their licenses

pre-installed but will require host computer connection and M8070B software plus

license installation. These procedures are located in this guide.
The M8040A-BU3 system has the M8000 module(s), M9537A AXIe Embedded Host

Computer, M8070B software and module licenses pre-installed in Windows 10.

If you ordered a system that requires on-site installation of individual M8000 modules or

the M9537A AXIe Embedded Host Computer into the M9505A AXIe Chassis, refer to the

Keysight M8000 Series of BER Test Solutions Installation Guide

for detailed module-level

installation instructions.

NOTE

Network licenses are not pre-installed on any system. If you plan to use the

M8040A system over a network, you must perform the network license

installation procedures in this guide.

Summary of Contents for M8000 Series



























































Search results

Summary of Contents for M8000 Series

Reviews:

Related manuals for M8000 Series

Brands by name

Popular brands

Keysight M8000 Series, Getting Started Manual

Search results

Summary of Contents for M8000 Series

Reviews:

Related manuals for M8000 Series

Brands by name

Popular brands