Keysight M1970 Series, User Manual

Page: 17 / 53

Overview 1
Keysight M1970 Series User’s Guide 17
Initial Inspection
Inspect the shipping container and the cushioning material for signs of stress.
Retain the shipping materials for future use, as you may wish to ship the
instrument to another location or to Keysight Technologies for service.
Shipping problems
If the shipping materials are damaged or the contents of the container are
incomplete:
– Contact the nearest Keysight Technologies office.
– Keep the shipping materials for the carrier’s inspection.
– If you must return the instrument to Keysight Technologies, use the original (or
comparable) shipping materials. See “Returning an M1970 Series Mixer for
Service” on page 45.
Table 1-1 Standard shipped items
Item Description
User’s Guide
Provides instructions on usage, retrofit requirements, troubleshooting,
specifications, and general information.
SMA cable
1 meter cable required to connect the mixer to the signal analyzer EXT
MIXER connector.
USB cable
1.8 meter USB cable required to connect the mixer to the signal
analyzer.
Certificate of calibration Provides information regarding the instrument calibration.
Waveguide screws Screws required for connection to the waveguide (5 ea).
Ball driver 3/32 inch hex driver for installation of the waveguide screws.
Wrench 5/16 inch for SMA cable installation.