Installation
Keysight
L7222C Coaxial Transfer Switch Operating
and
Service Manual
14
Installation
Initial Inspection
1. Inspect the shipping container for damage. If the shipping container or
cushioning material is damaged, it should be kept until the contents of
the shipment have been checked for completeness and the instrument
has been checked both mechanically and electrically.
•
Check for mechanical damage such as scratches or dents.
•
Procedures for checking electrical performance are given under
“Operator’s Check” or “Performance Tests’.
2. If the contents are incomplete, if there is mechanical damage or defect,
or if the instrument does not pass the electrical performance test, contact
the nearest
Keysight
Technologies Sales and Service office. Refer to the
Service and Support information in the front matter of this manual.
Keysight
Technologies will arrange for repair or replacement of the
damaged or defective equipment. Keep the shipping materials for the
carrier’s inspection.
3. If you are returning the instrument under warranty or for service,
repackaging the instrument requires original shipping containers and
materials or their equivalents.
Keysight
Technologies can provide
packaging materials identical to the original materials. Refer to Service
and Support information in the front matter of this manual for the
Keysight
Technologies nearest you. Attach a tag indicating the type of
service required, return address, model number, and serial number. Mark
the container
FRAGILE
to insure careful handling. In any
correspondence, refer to the instrument by model number and serial
number.
