Installation Note E8251-90396
11
Remove and replace A5 with A46 and A6 with A45
Refer to
.
1. Position the signal generator with the front panel facing you.
2. Lift the retention levers and disconnect the A5 Sampler, A6 Frac-N boards from the A31
Motherboard.
3. Lift the boards out of the slots.
4. Position the signal generator with the front panel facing you.
5. Install the A46 (Offset Loop) to the A5 slot and A45 (Frac-N) to the A6 slot
Figure 4
A5 Sampler, A-6 Frac-N, A45 Frac-N, and A46 Offset
W155 (Option UNY)
A5/A46
A6/A45
