Keysight DSOX3012T, User Manual

Page: 331 / 530

Save/Email/Recall (Setups, Screens, Data)
20
Keysight InfiniiVision 3000T X-Series Oscilloscopes User's Guide 331
You can also enter these strings by pressing the Config Email softkey and the To ,
From , Server , and Subject softkeys in the Configure Email Menu .
You can specify multiple e-mail addresses by separating each address by a
semi-colon.
The Server name is the name of your mail server running the Simple Mail
Transfer Protocol (SMTP). If you do not know this name, ask your Network
Administrator.
7 Finally, press the Press to Send Email softkey.
You can also configure the [Quick Action] key to e-mail setups, screen images, or
data. See “Configuring the [Quick Action] Key" on page 357.
Recalling Setups, Masks, or Data
1 Press the [Save/Recall] key.
2 In the Save/Recall Menu, press Recall .
3 In the Recall Menu, press Recall: , then, turn the Entry knob to select the type of
file you want to recall:
• Setup (*.scp) — See “To recall setup files" on page 332.
• Mask (*.msk) — See “To recall mask files" on page 332.
• Reference Waveform data (*.h5) — See “To recall reference waveform files from
a USB storage device" on page 332.
• Arbitrary Waveform data (*.csv) — See “To recall arbitrary waveforms" on
page 333.
• CAN Symbolic data (*.dbc) — For CAN serial decode.
• LIN Symbolic data (*.ld f) — For LIN serial decode.
You can also recall setups and mask files by loading them using the File Explorer.
See “File Explorer" on page 344.
You can also configure the [Quick Action] key to recall setups, masks, or reference
waveforms. See “Configuring the [Quick Action] Key" on page 357.