Keysight DSOX3012T, User Manual

Page: 332 / 530

332 Keysight InfiniiVision 3000T X-Series Oscilloscopes User's Guide
20
Save/Email/Recall (Setups, Screens, Data)
To recall setup files
Setup files can be recalled from one of 10 internal (\User Files) locations or from
an external USB storage device.
1 Press [Save/Recall] > Recall > Recall: ; then, turn the Entry knob to select Setup
(*.scp) .
2 Press the softkey in the second position and use the Entry knob to navigate to
the file to recall. See “To navigate storage locations" on page 329.
3 Press the Press to Recall softkey.
A message indicating whether the recall was successful is displayed.
4 If you would like to clear the display, press Clear Display .
To recall mask files
Mask files can be recalled from one of four internal (\User Files) locations or from
an external USB storage device.
1 Press [Save/Recall] > Recall > Recall: ; then, turn the Entry knob to select Mask
(*.msk) .
2 Press the softkey in the second position and use the Entry knob to navigate to
the file to recall. See “To navigate storage locations" on page 329.
3 Press the Press to Recall softkey.
A message indicating whether the recall was successful is displayed.
4 If you would like to clear the display or clear the recalled mask, press Clear
Display or Clear Mask .
To recall reference waveform files from a USB storage device
1 Press the [Save/Recall] key.
2 In the Save/Recall Menu, press the Recall softkey.
3 In the Recall Menu, press the Recall softkey and turn the Entry knob to select
Reference Waveform data (*.h5) .
4 Press the To Ref: softkey and turn the Entry knob to select the desired reference
waveform location.
5 Press the softkey in the second position and use the Entry knob to navigate to
the file to recall. See “To navigate storage locations" on page 329.
6 Press the Press to Recall softkey.