Getting Started
1
Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide
33
Front Panel Overlays for Different Languages
Front panel overlays, which have translations for the English front panel keys and
label text, are available in many languages. The appropriate overlay is included
when the localization option is chosen at time of purchase.
To install a front panel overlay:
1
Gently pull on the front panel knobs to remove them.
2
Insert the overlay's side tabs into the slots on the front panel.
3
Reinstall the front panel knobs.
Learn the Rear Panel Connectors
For the following figure, refer to the numbered descriptions in the table that
follows.
20.
USB Host port
This port is for connecting USB mass storage devices or printers to the oscilloscope.
Connect a USB compliant mass storage device (flash drive, disk drive, etc.) to save or recall
oscilloscope setup files and reference waveforms or to save data and screen images. See
, “Save/Recall (Setups, Screens, Data),” starting on page 215.
To print, connect a USB compliant printer. For more information about printing see
“Print (Screens),” starting on page 227.
You can also use the USB port to update the oscilloscope's system software when updates are
available.
NOTE:
You must
Eject
a USB mass storage device before unplugging it; otherwise, the device will be
marked as needing repair when connecting to a computer with the Windows operating system (even
though there are no harmful effects to the device).
CAUTION:Do not connect a host computer to the oscilloscope's USB host port.
A host computer
sees the oscilloscope as a device, so connect the host computer to the oscilloscope's device port (on
the rear panel). See
"Learn the Rear Panel Connectors"
21.
[External]
key
Press this key to set external trigger input options. See
22.
Ext Trig input
External trigger input BNC connector. See
explanation of this feature.
